Arctic walk-ins refrigeration systems

Arctic Industries offers many choices of refrigeration.  Refrigeration systems perfectly match the condensing unit to the evaporator coil for reliable and consistent operation.

Arctic offers four types

  • Remote
  • Pre-assembled Remote
  • Pre-assembled Remote with pre-charged Quick-connect lines
  • Self-contained

All systems are available in:

  • Low or medium temperature
  • Indoor or outdoor models
  • Air or water cooled condensers
  • Hermetic or semi-hermetic compressors

Remote systems

Every component necessary for operation is shipped for field assembly. The components included are:

  • Expansion valve
  • Pressure control
  • Sight glass
  • Contractor (3 phase)
  • Filter drier
  • Thermostat
  • Drain line heater and solenoid valve (low temp. only)

(Lines, fittings and refrigerant are not included)

Pre-assembled remote systems

Condensing units are completely assembled. All the components necessary for operation are factory mounted to ensure minimum field time for final hook up. Evaporator coils are ready to mount and are complete with properly matched expansion valve.

Pre-assembled remote with pre-charged quick-connect lines

Installation is quick and easy, as with the pre-assembled remote systems all components necessary for operation are factory mounted. Refrigeration line sets are pre-charged and simple Systems include the electrical harness.

Self-contained top-mount plug system

Fast and economical to install, this system is designed for indoor applications only. Pre-charged and pre-assembled condensing units and evaporators are mounted to a section of the ceiling panel matched to for a corresponding ABS framed opening in the ceiling. Ceiling mount units drop into place and seal automatically, ready to accept the final electrical hook-up and drain line (not included). A pre-wired fan cut –off switch is included on all plug systems.  Low temperature plug systems include drain line heat tape. All plug systems are pre-wired, run-tested and ready for installation.

Straddle-mount systems (ceiling and wall mount)

Fast and economical to install, these systems are designed primarily for outdoor applications. The straddle mount systems are designed primarily for outdoor applications. The straddle mount system makes installation fast and economical. The Arctic straddle mount refrigeration systems include a pre-wired fan cut-off switch.

Condensing units are perfectly matched to evaporators to provide consistent and reliable operation. Systems are mounted on reinforced steel frames. These frames are designed to drop into a factory notched wall panel then the ceiling panel is put in place. Straddle-mount systems are completely pre-assembled, pre-wired, pre-charged and factory run tested.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s